Cut Wire Shot
Our aim is to focus on the features that make your products perfect in processes such as vibration, blasting, painting and shotpeening. This is exactly why we have a versatile.surface treatment center and product range.
You can send us an e-mail using the information below or you can reach us from our phone numbers. You can be sure that we will provide you with the fastest return.
Our aim is to focus on the features that make your products perfect in processes such as vibration, blasting, painting and shotpeening. This is exactly why we have a versatile.surface treatment center and product range.
Cut wire is the most efficient abrasive for shotpeening applications. As with other steel abrasives the cut wire , does not have cause cracks and breaks , it crumbles in layers as it wears , so it retains its shape. The reasons for the high performance of the cutting wire material are that it does not contain gaps and cracks in its structure, does not leave dust on the surface of the applied material , and keeps its size and shape longer than other abrasives.
Typical Physical Properties | ||
Hardness (norm) | +/- 450 HV (44 HRC) | |
Grain shape | Cylindrical | |
Melting point | ca 1.535 °C | |
Specific gravity | ca. 7,4 g/cm3 | |
Bulk density* | ca. 3,9 – 4,9 g/cm3 | |
*Depending on grain size. | ||
Typical Chemical Analysis | ||
C | 0,45 – 0,60 % | |
Mn | 0,40 – 0,70 % | |
Si | 0,05 – 0,22 % | |
P | max. 0,05 % | |
S | max. 0,05 % | |
Fe | Remainder |
Metric | Diameter (mm) | |
0,40 | ||
0,60 | ||
0,80 | ||
0,90 | ||
1,00 | ||
1,20 | ||
1,50 | ||
1,60 | ||
1,80 | ||
2,00 | ||
2,20 | ||
2,40 | ||
2,60 |
Adding {{itemName}} to cart
Added {{itemName}} to cart