Conditioned Cut Wire
Our aim is to focus on the features that make your products perfect in processes such as vibration, blasting, painting and shotpeening. This is exactly why we have a versatile.surface treatment center and product range.
For detailed information
Where is it used?
Cutting wire, doesn’t contain gaps and cracks in its structure, does not leave dust on the surface of the applied material and keeps its size and shape longer than other abrasives , which is one of the reasons for the high performance of the cutting wire material. There are forms of cutting wire; G1, G2 and G3 in which the roundness ratio increases respectively.
Scope of Applications
- On Surfaces Where High Surface Roughness is Required
- Shot Peeing
- Automatic Blasting
| Typical Physical Properties | |
| Hardness (norm) | +/- 640 YG (56 HRC) |
| Grain shape | Rounded |
| Melting point | CA. 1,535 °C |
| Specific gravity | CA. 7,4 gr/ cm3 |
| Bulk density* | CA. 4,4 – 4,8 g/ cm3 |
| *Depending on grain size. | |
| Typical Chemical Analysis | |
| C | % 0,73 – 0,78 |
| Mn | %0,50 – 0,80 |
| Si | %0,10 – 0,30 |
| P | maks. %0,035 |
| S | maks. %0,035 |
| Fe | Remainder |
| Metric | Diameter (mm) |
| 0,3 | |
| 0,4 | |
| 0,5 | |
| 0,6 | |
| 0,7 | |
| 0,8 | |
| 0,9 | |
| 1,0 | |
| 1,2 | |
| 1,4 | |
| 1,6 |
- Pressure blasting machines
- Vacuum blasting machines
- Turbine automatic machines
- 25 kg bags on 1-ton pallets
- 1 ton in big bags